Introduction to the weight and material of Dalian heavy steel mesh

Steel mesh is widely used in our daily life, but the specific steel mesh specification is uncertain. Now let's talk about the theoretical weight of Dalian heavy steel mesh. The so-called theoretical weight of steel mesh refers to the theoretical weight after edging and surface treatment (except for non surface treatment). The actual weight will be different from the theoretical weight due to the difference of hemming, opening and incision. In the calculation of the dead weight of the steel plate mesh of the industrial platform and the delivery settlement of the steel plate mesh, the theoretical weight is taken as the calculation basis.

Heavy steel plate mesh is a kind of steel plate mesh product with large load capacity. It can be made of ordinary steel plate, stainless steel plate, iron plate, copper plate, aluminum plate, titanium plate, nickel plate, etc. as raw materials by pressing and stretching with high pressure.

Heavy steel plate mesh material: low carbon steel plate, stainless steel plate, aluminum magnesium alloy plate, aluminum plate, copper plate, titanium plate, nickel plate. Weaving and characteristics: punched, stretched and pressed, beautiful and generous, durable. Surface treatment: PVC dipping (plastic wrapping, spraying, painting), hot galvanizing, electro galvanizing, painting, etc.

If only by material, the mesh of steel plate material can be either steel plate mesh or punched steel plate mesh. The materials are naturally various ordinary steel plates and stainless steel plates. If the steel plate mesh only refers to the steel plate stretching expansion mesh, it can be made of various metal plates.

The steel plate mesh in general terms refers to the expanded metal plate mesh. After the metal plate mesh is processed into a mesh, the area will become several times or even dozens of times larger. Generally speaking, due to stretching, the stem thickness of the steel mesh is smaller than the plate thickness of the raw material steel plate of the steel mesh. Generally, the specification and model of the steel mesh should specify the width of the stem, the thickness of the stem, the length of the pitch, the short pitch, or the long and short inner holes. For the same long pitch, short pitch or long and short inner holes, the width of the stem and the thickness of the stem can be various. The same stem width, stem thickness and mesh can be large or small. There are few holes in the steel plate mesh. Generally, there are diamond, fish scale and hexagon. However, there is no waste in the process of processing the steel plate stretch mesh. Only if the customer needs a special overall size, they will cut it, so the cost is low.

In general terms, the raw material area of the punched plate mesh remains unchanged after punching. The punched plate mesh can be basically made of any hole shape, but the raw materials after punching can only be sold as scrap, so the production cost of punched plate mesh is higher with the same mesh opening rate.