How is the surface treatment of Dalian light steel mesh carried out?

Dalian light steel mesh perforated sieve plate has better decorative effect after certain surface treatment. The method is as follows:

1、 Perforated sieve plate plate oxidation: oxidation is generally used for aluminum plate perforated mesh. After surface anodizing treatment, aluminum plate perforated mesh can show bronze, golden yellow, silver white and other colors. Whether it is used for computer case or indoor decoration, it will show its nobleness and luxury.

2、 Punching screen plate wire drawing: The products after punching screen wire drawing are also mainly used for interior decoration.

3、 Punching sieve plate electrostatic spraying: after electrostatic spraying, the surface of the punching mesh can be sprayed into white, green, silver gray and other colors. Because of the variety of hole types of the punching mesh, it has excellent decorative effect.

Leveling of punching network: we can restore the deformed punching plate to its original flat state by using the leveling machine. All steel plates with a thickness of 0.8mm-12mm can be leveled. It is required to use lubricant to clean the punching hole, but we also have a degreasing process to remove the traces on its surface, so that the orifice plate appears clean. Manufacturing and deep processing

Surface treatment of punching mesh: punching, leveling, cutting and other processes will lead to incomplete plate surface, but these imperfections are acceptable in general industrial supplies. If you have special requirements, we will take additional measures to prevent it, such as powder spraying or painting, galvanization, hot galvanizing, anodizing, etc.