What determines the mesh shape of Dalian medium steel mesh

Let me solve the three mysteries of steel plate mesh that few people know: how is the medium-sized steel plate mesh produced in Dalian? Can one meter steel plate produce a steel plate mesh larger than one meter? The steel mesh is not welded

It is not woven, but is made of a whole steel plate by shearing and stretching with a special machine. The mesh you see is cut by the cutter installed on the special machine and then stretched. Therefore

This leads to the next question. What determines the mesh shape?

The answer has already been given: it is determined by the cutter. Specifically, the cutter determined by the cutter shape has arrow shape and trapezoid shape. We can produce our products through arrangement and combination

Common diamond shaped steel mesh, hexagonal steel mesh, fancy steel mesh, etc.

Can one meter steel plate produce more than one meter steel plate mesh? It has been mentioned above that the steel mesh is cut and stretched from steel plates. Note that the word "stretching" is not a slight stretching, but a mesh

A length of several centimeters or even more than ten centimeters can be drawn out. The length of many meshes is very objective, so a steel plate with a length of one meter can be used to produce a length of more than ten meters, which is much longer than the steel

The length used for the plate.

The steel mesh pitch refers to the long pitch and short pitch of steel mesh. The steel plate mesh is a metal plate mesh composed of diamond shaped holes formed by double overlapping metal wire stems. The mesh pitch is only a part of the mesh specification data. The mesh data includes six parts: long pitch, short pitch, stem width, stem thickness, overall dimension width, and overall dimension length. The long pitch and short pitch are the data that determine the size of the diamond mesh.

Long pitch: the distance from the center of diagonal node of diamond mesh to the long direction.

Short pitch: the distance from the center of diagonal node of diamond mesh to the short direction.

For the specification of ordinary steel mesh, the long pitch is twice the length of the short pitch. According to the requirements for the tensile strength of steel mesh in the steel mesh quality inspection standard, the length of the short pitch cannot exceed 75% of the long pitch, otherwise the tensile strength of steel mesh will be greatly reduced. The short pitch of load-bearing and tensile thick steel mesh is about 40% of the long pitch, or even smaller, which enhances the tensile strength and durability. In a word, when the long pitch of the steel mesh is fixed, the smaller the short pitch, the greater the tensile strength of the steel mesh. On the contrary, the larger the short pitch of the steel mesh, the smaller the tensile strength of the steel mesh.